Discussion:
How to prepare disk on a Power 6 Suse Linux partition for
(too old to reply)
Monty G. James
2014-10-15 17:53:45 UTC
Permalink
Raw Message
Use the AIX diagnostic cd available here: https://www-304.ibm.com/webapp/set2/sas/f/diags/home.html, get CDlatest.iso.


from: Kirk Goins <kirkgoins-***@public.gmane.org>
subject: Re: How to prepare disk on a Power 6 Suse Linux partition for
sale orlease return

OK That's a whole different issue...
No, they work fine for the Power 6. As long as they are used by Linux
or AIX and not IBM i.
I would rather avoid any low level formatting that might confuse the
bejeebers out of the leasing company.
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://cp.mcafee.com/d/5fHCMUqdEI8IICzBxYQsK6XCQQnT4nTTPqqbXybzMUSCy-U
y--Urjhd7aqbbbVJmI9BK4tl-wa9R842NZi10JOVIDkwgb7R842TbCStKgZBx_HYUYDt5D
HTbFIL8YyCesuvsVqWtAkRkrzKl3PWApmU6CQPrbVK_8K6zBV55BeXNKVI04xVkHnBPqIA
8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6y
Uld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsrGIbp
Date: 10/15/2014 01:16 PM
Subject: Re: How to prepare disk on a Power 6 Suse Linux partition
for sale or lease return
So the drives are non-supported for the Power6? Typically the only
difference is the sector/block size. I have formatted 300GB back to
283GB in the past and 146GB back to 139s or gone the other way.
Won't work.
But I have some in here that is labeled pSeries disk (down to the
labels on the drives themselves)
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://cp.mcafee.com/d/k-Kr3zqb2bb9EVovd7bxKVJd5ZN5ZZYSCy-UyUYedFELK
8LLK6QQjhOCyOO-rlH2prx7lvE2yti10IvkwgbsKr9R842NZi10JOVJDrAfpovW_ef9T
hpWZOWrbOf8FzD7DTemKDp5dl6UXBgY-F6lK1FJASO-rLObxEVuhhpjKYrKr018ulaRV
sSH92eM8-nfbAaJMJZ00GRxcJMzGLQe9R842NZi10JOUalAx7o4vVsSCY--qejoS6xMb
40o4xEK5jh07i8_io1Cy0cRfd42b81Cy0dFhLPh0yUyYrp76XFbrq0pnTxlv
Date: 10/15/2014 01:05 PM
Subject: Re: How to prepare disk on a Power 6 Suse Linux
partition
for sale or lease return
Since I ma and i guy...
Heck I would create an LPAR ( or use one already cfg'd ) and point
those and only those disks to that LPAR, boot/install LIC which will
init the loadsource then use DST to init the others.
Again, I am not looking for a DOD rated wipe.
I am preparing my last Power 6 for lease return. I have all the
IBM i disk initialized. But I have some in here that is labeled
pSeries
disk
(down to the labels on the drives themselves). These were used by
my
Suse
Linux lpar. SUSE Linux Enterprise Server 11 installation program
v3.3.91
(aka SLES 11).
I had a thread going at DeveloperWorks at
http://cp.mcafee.com/d/avndy0s738Qrhohppd7b3VEVsdTdFELK8LLLCQQnT4n7xNJ
d5ZN5ZZMSCyqekQmmnPqJojbs8WHZ0kjGg85zWA21rBPpeF0wmfGg85KndIXsxXb3_nVNV
eWbfnKnjpuhV5csUY-VORQX8FGET7sG7DR8OJMddI6SnPt-hsd7bOabatTztPpesRG9pxj
F45unN3PfDRm-9yIiJcnlrxapr7qNrlFweOtlFm9igeutsttt7c5Qi7K5S7D7iXSFEBTnd
8fE3zhPsxqNJmi4twhYKun8lrxrW01lH2prx7lvEsjGg85zWA21rBMkH92eM8_OVJdVZYQ
sCNId3wm80M93hsaCy0eAh-AM3d40pGuq84mg3d40rizvCy15N5USOedNi4n
but something went haywire there and my posts are marked as spam now.
I
suspect the words "for sale" in the subject line.
Used the HMC to set the partition profile settings to boot to SMS.
I also changed the partition properties boot keylock position to
Manual.
Then I said to activate the profile, using the advanced button to
ensure
that it was set to Manual and SMS. I also told it to open up a
terminal
window or console session.
Version EL350_149
SMS 1.7 (c) Copyright IBM Corp. 2000,2008 All rights reserved.
----------------------------------------------------------------------
---------
Main Menu
1. Select Language
2. Setup Remote IPL (Initial Program Load)
3. Change SCSI Settings
4. Select Console
5. Select Boot Options
I took
5. Select Boot Options
Multiboot
1. Select Install/Boot Device
2. Configure Boot Device Order
3. Multiboot Startup <OFF>
4. SAN Zoning Support
I took
1. Select Install/Boot Device
Select Device Type
1. Diskette
2. Tape
3. CD/DVD
4. IDE
5. Hard Drive
6. Network
7. List all Devices
I took
7. List all Devices
Select Device
Device Current Device
Number Position Name
1. 1 SCSI CD-ROM
( loc=U0588.001.012EF8C-CB1-C14-T1-L1-L0 )
2. 2 SCSI 1463 GB Harddisk
( loc=U0595.001.13230A8-CB1-C01-T5-L0-L0 ) I selected the
first, the SCSI CD-ROM.
Select Task
SCSI CD-ROM
( loc=U0588.001.012EF8C-CB1-C14-T1-L1-L0 )
1. Information
2. Normal Mode Boot
3. Service Mode Boot
3. Service Mode Boot
Are you sure you want to exit System Management Services?
1. Yes
2. No
I selected
1. Yes
Welcome to SuSE Linux Enterprise 11!
Type "install" to start the YaST installer on this CD/DVD
Type "slp" to start the YaST install via network
Type "rescue" to start the rescue system on this CD/DVD
Welcome to yaboot version r22.8-r1190.SuSE booted from
\ya
boot.ibm'
running with firmware 'IBM,EL350_149' on model 'IBM,8203-E4A',
serial 'IBM,0210813C5'
, partition 'deletemeLinux'
Enter "help" to get some basic usage information
In entered in rescue.
Main Menu
1) Start Installation
2) Settings
3) Expert
4) Exit or Reboot
Last time I tried 3) Expert. I could use ls to list files and
whatnot.
However I couldn't use fdisk as it kept telling me it wasn't found.
Tried
changing into various directories but I couldn't find it.
Any suggestions?
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept
1600 Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://cp.mcafee.com/d/1jWVIg6x8gdEI8IICzBxYQsK6XCQQnT4nTTPqqbXybz
MUSCy-Uy--Urjhd7aqbbbVJmI9BK4tl-wa9R842NZi10JOVIDkwgb7R842TbCStKgZ
Bx_HYUYDt5DHTbFIL8YyCesuvsVqWtAkRkrzKl3PWApmU6CTPrbVK_8K6zBV55BeXN
KVI04xVkHnBPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPq
rPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsrYQyiz
O0S
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing
list
unsubscribe, or change list options,
http://cp.mcafee.com/d/2DRPowrhohppd7b3VEVsdTdFELK8LLLCQQnT4n7xNJd
5ZN5ZZMSCyqekQmmnPqJojbs8WHZ0kjGg85zWA21rBPpeF0wmfGg85KndIXsxXb3_n
VNVeWbfnKnjpuhV5csUY-VORQX8FGET7sG7DR8OJMddK6SnPt-hsd7bOabatTztPo0
c-l9QVmi4twh_BY4RtxxYGjB1SKaOgzI2fBPPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_g
UDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8I
moment to review the archives at
http://cp.mcafee.com/d/k-Kr3xAi6wUSyMyOOqem7PhOUrKrjhvshvvvdFELK8Kf3zqqbXybXXxJd4QsFEIILCRqMCmUhRnW0EDkwgb7R842TbCOti10IvkwgbsKrpSV3Sm7-LPzOtQmuLsKCOYzOaoVNVZPBHFShjlhKeVkffGhBrwqr76SnPt-hsd7bOabatTztPo0foS9Oc_OIA8X0z_bUH92eM8-nfdGOgzI2fBPOV2Hsbvg0aJojbs8WHZ3yti10IvkwgbsK2Bp8hS17-ndFLfLCzASdxEs2N0618qbxkQg1QyfQC0pEw3djPh0yO0pEw3qkrYQg8K8L6ShNIXeZbfCb.
--
Kirk
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
subscribe, unsubscribe, or change list options,
http://cp.mcafee.com/d/avndygw96Qm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsrj
hvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-s
ujKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jrNJBYTvAn3hOYyyODtUTsS03fBi
telAx7o4vVv1dnoovaAVgtHyIA8X0zVsYSH92eM8-nfbAaJMJZ00GRxcJMzGLQe9R842
NZi10JOUalAx7o4vVsSCY--qejoS6xMb40o4xEK5jh07i8_io1Cy0cRfd42b81Cy0dFh
posting, please take a moment to review the archives at
http://cp.mcafee.com/d/5fHCMUpdEI8IICzBxYQsK6XCQQnT4nTTPqqbXybzMUSCy-Uy--Urjhd7aqbbbVJmI9BK4tl-wa9R842NZi10JOVIDkwgb7R842TbCStKgZBx_HYUYDt5DHTbFIL8YyCesuvsVqWtAkRkrzKl3PWApmU6CPhOrpvdTV5MQsL8EIFTudTdw0ZzoD8P_aOgzI2fYLyIA8X0zVsYSH92eM8-nfbAaJMJZ00GRxcJMzGLQe9R842NZi10JOUalAx7o4vVsSCY--qejoS6xMb40o4xEK5jh07i8_io1Cy0cRfd42b81Cy0dFhLPh0yUyYrp76V4Z9xERD990x.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing
list
unsubscribe, or change list options,
http://cp.mcafee.com/d/avndxMw91MOrhohppd7b3VEVsdTdFELK8LLLCQQnT4n7x
NJd5ZN5ZZMSCyqekQmmnPqJojbs8WHZ0kjGg85zWA21rBPpeF0wmfGg85KndIXsxXb3_
nVNVeWbfnKnjpuhV5csUY-VORQX8FGET7sG7DR8OJMddETdILCXYyUqenAkmkXL6XCM0
pYGjFOIA8X0z_bU9GX33VkDa3JslAx7o4vbDCRp8hS17OVVsxlK5LE05mI9BK4tl-xNe
F0wmfGg85Kn1iIA8X0z_bCQTDTPhOr6MQe1ow30Ad5MGq80Wh7Wj0cQg1CFVEwhp0cQg
Before posting, please take a moment to review the archives at
http://cp.mcafee.com/d/avndy0O86Qm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsrjhvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-sujKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jqa9JBYTvAn3hOYyyODtUTsS03SdyszfYH92eM8_O-aOgzI2fBPPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsrmMA1u6jkuKB.
--
Kirk
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
unsubscribe, or change list options,
http://cp.mcafee.com/d/2DRPoOd2gw96Qm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsr
jhvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-su
jKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jqapJBYTvAn3hOYyyODtUTsS03fBite
lAx7o4vVv1dnoovaAVgtHyIA8X0zVsYSH92eM8-nfbAaJMJZ00GRxcJMzGLQe9R842NZi1
0JOUalAx7o4vVsSCY--qejoS6xMb40o4xEK5jh07i8_io1Cy0cRfd42b81Cy0dFhLPh0yU
please take a moment to review the archives at
http://cp.mcafee.com/d/5fHCMUe4zqb2bb9EVovd7bxKVJd5ZN5ZZYSCy-UyUYedFELK8LLK6QQjhOCyOO-rlH2prx7lvE2yti10IvkwgbsKr9R842NZi10JOVJDrAfpovW_ef9ThpWZOWrbOf8FzD7DTemKDp5dl6UXBgY-F6lK1FJ5ASO-rLObxEVuhhpjKYrKr01X6NehD-lAx7o4vVv5p8hS17OVVJmi4twhYKun8lrxrW01lH2prx7lvEsjGg85zWA21rBMkH92eM8_OVJdVZYQsCNId3wm80M93hsaCy0eAh-AM3d40pGuq84mg3d40rizvCy15N5USOedUyLBjfPO.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
unsubscribe, or change list options,
http://cp.mcafee.com/d/2DRPoAd1MOrhohppd7b3VEVsdTdFELK8LLLCQQnT4n7xNJd
5ZN5ZZMSCyqekQmmnPqJojbs8WHZ0kjGg85zWA21rBPpeF0wmfGg85KndIXsxXb3_nVNVe
WbfnKnjpuhV5csUY-VORQX8FGET7sG7DR8OJMddEI6SnPt-hsd7bOabatTztPo0c-l9QVm
i4twh_BY4RtxxYGjB1SKaOgzI2fBPPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842
TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42byb
please take a moment to review the archives at
http://cp.mcafee.com/d/FZsS91MA76Qm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsrjhvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-sujKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jqbVJBYTvAn3hOYyyODtUTsS03SdyszfYH92eM8_O-aOgzI2fBPPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsrAtN6.
--
Kirk


------------------------------

message: 2
date: Wed, 15 Oct 2014 12:33:08 -0500
from: Thomas Garvey <tgarvey-aP4BoU9uSdHQT0dZR+***@public.gmane.org>
subject: Re: What OS feature is OPNQRYF?

The OPNQRYF is just over a normal, non-temporary, database file. The
file does contain data extracted from journals however. But the OPNQRYF
couldn't know that or care.




Thomas Garvey
Since you mentioned journaling, what journaling is going on with the objects
involved in the opnqryf (the queried file(s), temp / new file, the library)
?
Jim
-----Original Message-----
Thomas Garvey
Sent: Wednesday, October 15, 2014 12:41 PM
To: Midrange Systems Technical Discussion
Subject: Re: What OS feature is OPNQRYF?
So far, the message is only occurring in this one job (with the OPNQRYF).
Thomas Garvey
I think that the SIGNOFF command has just as much likelihood of
generating that error as does the OPNQRYF command. Some license
messages are just repeated at periodic intervals until you either get
a license for it or remove it from the system.
BTW, if you are doing much journalling that option of the OS is so
very much worth it. Definitely. Without any doubt. I have time
trials...
Rob Berendt
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
or change list options,
visit: http://cp.mcafee.com/d/avndygw720Qrhohppd7b3VEVsdTdFELK8LLLCQQnT4n7xNJd5ZN5ZZMSCyqekQmmnPqJojbs8WHZ0kjGg85zWA21rBPpeF0wmfGg85KndIXsxXb3_nVNVeWbfnKnjpuhV5csUY-VORQX8FGET7sG7DR8OJMddEK6SnPt-hsd7bOabatTztPo0c-l9QVmi4twh_BY4RtxxYGjB1SKaOgzI2fBPPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsrFJfH8fNY
moment to review the archives at http://cp.mcafee.com/d/2DRPowd3gQ76Qm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsrjhvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-sujKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jq8USO-rLObxEVuhhpjKYrKr01X6NehD-lAx7o4vVv5p8hS17OVVJmi4twhYKun8lrxrW01lH2prx7lvEsjGg85zWA21rBMkH92eM8_OVJdVZYQsCNId3wm80M93hsaCy0eAh-AM3d40pGuq84mg3d40rizvCy15N5USOedLmYCaN_Z.
------------------------------

message: 3
date: Wed, 15 Oct 2014 14:35:24 -0300
from: Roberto Jos? Etcheverry Romero <yggdrasil.raiker-***@public.gmane.org>
subject: Re: How to prepare disk on a Power 6 Suse Linux partition for
sale orlease return

Rob,

Those disks work either for Linux or AIX. i would pop an AIX diagnostic
disk and move all the disks from hdisk to pdisk to hdisk (array candidate
and back). That is if you have a raid controller. Otherwise i would muck
around the diag options, there's gotta be an "initialize" or "certify" disk.
Worst case? plug them into a normal server and just erase them there. (any
xSeries or SystemX server with those bays can use those disks)

Best Regards,
OK That's a whole different issue...
No, they work fine for the Power 6. As long as they are used by Linux or
AIX and not IBM i.
I would rather avoid any low level formatting that might confuse the
bejeebers out of the leasing company.
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://cp.mcafee.com/d/1jWVIi41Eq6zqb2bb9EVovd7bxKVJd5ZN5ZZYSCy-UyUYedFELK8LLK6QQjhOCyOO-rlH2prx7lvE2yti10IvkwgbsKr9R842NZi10JOVJDrAfpovW_ef9ThpWZOWrbOf8FzD7DTemKDp5dl6UXBgY-F6lK1FJ5USO-rLObxEVuhhpjKYrKr018ulaRVsSH92eM8-nfbAaJMJZ00GRxcJMzGLQe9R842NZi10JOUalAx7o4vVsSCY--qejoS6xMb40o4xEK5jh07i8_io1Cy0cRfd42b81Cy0dFhLPh0yUyYrp76W95NBwpyuO8f
Date: 10/15/2014 01:16 PM
Subject: Re: How to prepare disk on a Power 6 Suse Linux partition
for sale or lease return
So the drives are non-supported for the Power6? Typically the only
difference is the sector/block size. I have formatted 300GB back to 283GB
in the past and 146GB back to 139s or gone the other way.
Won't work.
But I have some in here that is labeled pSeries disk (down to the
labels
on the drives themselves)
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://cp.mcafee.com/d/2DRPoA96Qm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsrjhvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-sujKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jq9EVdILCXYyUqenAkmkXL6XCM0i7BiJundGOgzI2fBPOV2Hsbvg0aJojbs8WHZ3yti10IvkwgbsK2Bp8hS17-ndFLfLCzASdxEs2N0618qbxkQg1QyfQC0pEw3djPh0yO0pEw3qkrYQg8K8L6ShNKkqt
Date: 10/15/2014 01:05 PM
Subject: Re: How to prepare disk on a Power 6 Suse Linux
partition
for sale or lease return
Since I ma and i guy...
Heck I would create an LPAR ( or use one already cfg'd ) and point
those
and only those disks to that LPAR, boot/install LIC which will init the
loadsource then use DST to init the others.
Again, I am not looking for a DOD rated wipe.
I am preparing my last Power 6 for lease return. I have all the IBM
i
disk initialized. But I have some in here that is labeled pSeries
disk
(down to the labels on the drives themselves). These were used by my
Suse
Linux lpar. SUSE Linux Enterprise Server 11 installation program
v3.3.91
(aka SLES 11).
I had a thread going at DeveloperWorks at
http://cp.mcafee.com/d/avndxMs96Qm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsrjhvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-sujKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jqtPrbVK_8K6zBV55BeXNKVIDeqR4IMFQy2LbUxVDPWHv4Nm9mCbGJMBcJzJoJGQM7peGQH4F87feKeKKzC2W93T2X3PzFtXkQiXHCA7Q1NEVKgJoSH92eM8-nfbAaJMJZ00GRxcJMzGLQe9R842NZi10JOUalAx7o4vVsSCY--qejoS6xMb40o4xEK5jh07i8_io1Cy0cRfd42b81Cy0dFhLPh0yUyYrp76O0_Rvtq-
but something went haywire there and my posts are marked as spam now.
I
suspect the words "for sale" in the subject line.
Used the HMC to set the partition profile settings to boot to SMS.
I also changed the partition properties boot keylock position to
Manual.
Then I said to activate the profile, using the advanced button to
ensure
that it was set to Manual and SMS. I also told it to open up a
terminal
window or console session.
Version EL350_149
SMS 1.7 (c) Copyright IBM Corp. 2000,2008 All rights reserved.
-------------------------------------------------------------------------------
Main Menu
1. Select Language
2. Setup Remote IPL (Initial Program Load)
3. Change SCSI Settings
4. Select Console
5. Select Boot Options
I took
5. Select Boot Options
Multiboot
1. Select Install/Boot Device
2. Configure Boot Device Order
3. Multiboot Startup <OFF>
4. SAN Zoning Support
I took
1. Select Install/Boot Device
Select Device Type
1. Diskette
2. Tape
3. CD/DVD
4. IDE
5. Hard Drive
6. Network
7. List all Devices
I took
7. List all Devices
Select Device
Device Current Device
Number Position Name
1. 1 SCSI CD-ROM
( loc=U0588.001.012EF8C-CB1-C14-T1-L1-L0 )
2. 2 SCSI 1463 GB Harddisk
( loc=U0595.001.13230A8-CB1-C01-T5-L0-L0 )
I selected the first, the SCSI CD-ROM.
Select Task
SCSI CD-ROM
( loc=U0588.001.012EF8C-CB1-C14-T1-L1-L0 )
1. Information
2. Normal Mode Boot
3. Service Mode Boot
3. Service Mode Boot
Are you sure you want to exit System Management Services?
1. Yes
2. No
I selected
1. Yes
Welcome to SuSE Linux Enterprise 11!
Type "install" to start the YaST installer on this CD/DVD
Type "slp" to start the YaST install via network
Type "rescue" to start the rescue system on this CD/DVD
Welcome to yaboot version r22.8-r1190.SuSE
booted from
,0:1,\suseboot\ya
boot.ibm'
running with firmware 'IBM,EL350_149' on model 'IBM,8203-E4A', serial
'IBM,0210813C5'
, partition 'deletemeLinux'
Enter "help" to get some basic usage information
In entered in rescue.
Main Menu
1) Start Installation
2) Settings
3) Expert
4) Exit or Reboot
Last time I tried 3) Expert. I could use ls to list files and
whatnot.
However I couldn't use fdisk as it kept telling me it wasn't found.
Tried
changing into various directories but I couldn't find it.
Any suggestions?
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://cp.mcafee.com/d/1jWVIq410qdEI8IICzBxYQsK6XCQQnT4nTTPqqbXybzMUSCy-Uy--Urjhd7aqbbbVJmI9BK4tl-wa9R842NZi10JOVIDkwgb7R842TbCStKgZBx_HYUYDt5DHTbFIL8YyCesuvsVqWtAkRkrzKl3PWApmU6CQQjrbVK_8K6zBV55BeXNKVI04xVkHnBPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsrhFK8
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing
list
To subscribe, unsubscribe, or change list options,
visit: http://cp.mcafee.com/d/FZsS81MOrhohppd7b3VEVsdTdFELK8LLLCQQnT4n7xNJd5ZN5ZZMSCyqekQmmnPqJojbs8WHZ0kjGg85zWA21rBPpeF0wmfGg85KndIXsxXb3_nVNVeWbfnKnjpuhV5csUY-VORQX8FGET7sG7DR8OJMddFFCSnPt-hsd7bOabatTztPo0c-l9QVmi4twh_BY4RtxxYGjB1SKaOgzI2fBPPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsr2qMG
Before posting, please take a moment to review the archives
at http://cp.mcafee.com/d/5fHCN0i4zqb2bb9EVovd7bxKVJd5ZN5ZZYSCy-UyUYedFELK8LLK6QQjhOCyOO-rlH2prx7lvE2yti10IvkwgbsKr9R842NZi10JOVJDrAfpovW_ef9ThpWZOWrbOf8FzD7DTemKDp5dl6UXBgY-F6lK1FJdASO-rLObxEVuhhpjKYrKr01X6NehD-lAx7o4vVv5p8hS17OVVJmi4twhYKun8lrxrW01lH2prx7lvEsjGg85zWA21rBMkH92eM8_OVJdVZYQsCNId3wm80M93hsaCy0eAh-AM3d40pGuq84mg3d40rizvCy15N5USOedZ7bP.
--
Kirk
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To subscribe, unsubscribe, or change list options,
visit: http://cp.mcafee.com/d/2DRPoQ93gArhohppd7b3VEVsdTdFELK8LLLCQQnT4n7xNJd5ZN5ZZMSCyqekQmmnPqJojbs8WHZ0kjGg85zWA21rBPpeF0wmfGg85KndIXsxXb3_nVNVeWbfnKnjpuhV5csUY-VORQX8FGET7sG7DR8OJMddFI6SnPt-hsd7bOabatTztPo0c-l9QVmi4twh_BY4RtxxYGjB1SKaOgzI2fBPPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsrkPeb
Before posting, please take a moment to review the archives
at http://cp.mcafee.com/d/avndzgArhohppd7b3VEVsdTdFELK8LLLCQQnT4n7xNJd5ZN5ZZMSCyqekQmmnPqJojbs8WHZ0kjGg85zWA21rBPpeF0wmfGg85KndIXsxXb3_nVNVeWbfnKnjpuhV5csUY-VORQX8FGET7sG7DR8OJMddFLCSnPt-hsd7bOabatTztPo0foS9Oc_OIA8X0z_bUH92eM8-nfdGOgzI2fBPOV2Hsbvg0aJojbs8WHZ3yti10IvkwgbsK2Bp8hS17-ndFLfLCzASdxEs2N0618qbxkQg1QyfQC0pEw3djPh0yO0pEw3qkrYQg8K8L6ShNJohA-G-UIksy.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To subscribe, unsubscribe, or change list options,
visit: http://cp.mcafee.com/d/2DRPowcxMwd6Qm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsrjhvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-sujKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jqrxJBYTvAn3hOYyyODtUTsS03fBitelAx7o4vVv1dnoovaAVgtHyIA8X0zVsYSH92eM8-nfbAaJMJZ00GRxcJMzGLQe9R842NZi10JOUalAx7o4vVsSCY--qejoS6xMb40o4xEK5jh07i8_io1Cy0cRfd42b81Cy0dFhLPh0yUyYrp76_mwJpd9XJJT4
Before posting, please take a moment to review the archives
at http://cp.mcafee.com/d/avndzgQcygArhohppd7b3VEVsdTdFELK8LLLCQQnT4n7xNJd5ZN5ZZMSCyqekQmmnPqJojbs8WHZ0kjGg85zWA21rBPpeF0wmfGg85KndIXsxXb3_nVNVeWbfnKnjpuhV5csUY-VORQX8FGET7sG7DR8OJMddFzzrbVK_8K6zBV55BeXNKVI07Ir4V6vVmi4twh_BYlAx7o4vbDCRp8hS17OVVsxlK5LE05mI9BK4tl-xNeF0wmfGg85Kn1iIA8X0z_bCQTDTPhOr6MQe1ow30Ad5MGq80Wh7Wj0cQg1CFVEwhp0cQg1Jad-q84n4nzr8USWpC.
--
Kirk
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To subscribe, unsubscribe, or change list options,
visit: http://cp.mcafee.com/d/5fHCMUSyMyOOqem7PhOUrKrjhvshvvvdFELK8Kf3zqqbXybXXxJd4QsFEIILCRqMCmUhRnW0EDkwgb7R842TbCOti10IvkwgbsKrpSV3Sm7-LPzOtQmuLsKCOYzOaoVNVZPBHFShjlhKeVkffGhBrwqrjudILCXYyUqenAkmkXL6XCM0pYGjFOIA8X0z_bU9GX33VkDa3JslAx7o4vbDCRp8hS17OVVsxlK5LE05mI9BK4tl-xNeF0wmfGg85Kn1iIA8X0z_bCQTDTPhOr6MQe1ow30Ad5MGq80Wh7Wj0cQg1CFVEwhp0cQg1Jad-q84n4nzr8UTRtB
Before posting, please take a moment to review the archives
at http://cp.mcafee.com/d/k-Kr3xESyMyOOqem7PhOUrKrjhvshvvvdFELK8Kf3zqqbXybXXxJd4QsFEIILCRqMCmUhRnW0EDkwgb7R842TbCOti10IvkwgbsKrpSV3Sm7-LPzOtQmuLsKCOYzOaoVNVZPBHFShjlhKeVkffGhBrwqrjd79JBYTvAn3hOYyyODtUTsS03SdyszfYH92eM8_O-aOgzI2fBPPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsrwLE_UtEEacFV.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To subscribe, unsubscribe, or change list options,
visit: http://cp.mcafee.com/d/FZsS92gOd1NJ5x5BAQsIfCzBMTsSCy-Uy---rjhvshsu76QQnT4nTT3qq9EVjhppvdGRxcJMzGLQ1heF0wmfGg85KndAWA21o-F0wmVsSPJO7IIfZvD7AXEIZuVtdBV7AkNPzPXDbnjIyCGzstOEuvkzaT0QSPsSO-rLObxEVuhhpjKYrKr01DOFeDaOgzI2fYLwCHIcfBisEeRNmi4twhYKurlAx7o4vbDBO5mUm-w0lqMCmUhRnW74WA21o-F0wmVs5aOgzI2fYKrjuvvd79Ir3gU5y0c2gQn2FEw3F4vFc0Ph06qDCy15A0Ph06QETVEwhshudIzzrDUrBSFpt5FC
Before posting, please take a moment to review the archives
at http://cp.mcafee.com/d/2DRPos81NJ5x5BAQsIfCzBMTsSCy-Uy---rjhvshsu76QQnT4nTT3qq9EVjhppvdGRxcJMzGLQ1heF0wmfGg85KndAWA21o-F0wmVsSPJO7IIfZvD7AXEIZuVtdBV7AkNPzPXDbnjIyCGzstOEuvkzaT0QSOyrpvdTV5MQsL8EIFTudTdw0ZzoD8P_aOgzI2fYLyIA8X0zVsYSH92eM8-nfbAaJMJZ00GRxcJMzGLQe9R842NZi10JOUalAx7o4vVsSCY--qejoS6xMb40o4xEK5jh07i8_io1Cy0cRfd42b81Cy0dFhLPh0yUyYrp76PNi8sz4ByZFG.
--
Kirk
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To subscribe, unsubscribe, or change list options,
visit: http://cp.mcafee.com/d/k-Kr6zqb2bb9EVovd7bxKVJd5ZN5ZZYSCy-UyUYedFELK8LLK6QQjhOCyOO-rlH2prx7lvE2yti10IvkwgbsKr9R842NZi10JOVJDrAfpovW_ef9ThpWZOWrbOf8FzD7DTemKDp5dl6UXBgY-F6lK1FJBcSO-rLObxEVuhhpjKYrKr01DOFeDaOgzI2fYLwCHIcfBisEeRNmi4twhYKurlAx7o4vbDBO5mUm-w0lqMCmUhRnW74WA21o-F0wmVs5aOgzI2fYKrjuvvd79Ir3gU5y0c2gQn2FEw3F4vFc0Ph06qDCy15A0Ph06QETVEwhshudIzzr652Boqlyt0p
Before posting, please take a moment to review the archives
at http://cp.mcafee.com/d/k-Kr4x0SyMyOOqem7PhOUrKrjhvshvvvdFELK8Kf3zqqbXybXXxJd4QsFEIILCRqMCmUhRnW0EDkwgb7R842TbCOti10IvkwgbsKrpSV3Sm7-LPzOtQmuLsKCOYzOaoVNVZPBHFShjlhKeVkffGhBrwqrppdILCXYyUqenAkmkXL6XCM0uNIjAp_Bp8hS17-nNmi4twhYKurlAx7o4vbDBO5mUm-w0lqMCmUhRnW74WA21o-F0wmVs5aOgzI2fYKrjuvvd79Ir3gU5y0c2gQn2FEw3F4vFc0Ph06qDCy15A0Ph06QETVEwhshudIzzv4uprE7iIn-E.
------------------------------

message: 4
date: Wed, 15 Oct 2014 13:35:57 -0400
from: "John Allen" <jallen-***@public.gmane.org>
subject: RSTOBJ = MCH1011 Can not transfer to new owner ot primary
group

I am trying to restore a couple of files from a save file.
The files were saved another system (not ours)

We are running 6.1

I can do a DSPSAVF file and see the contents of the save
file

I have tried doing the retore with QSECOFR

Then I created a user profile the same as the owner of the
files (display on DSPSAVF screen)

We do not use



The error is:



RSTOBJ OBJ(*ALL) SAVLIB(QTEMP) DEV(*SAVF) SAVF(TGLIB/TGSAVF)


DTAARA DFWSAVDBX in library QTEMP restored with primary
group *NONE.

Cannot transfer to new owner or primary group.


Function check. MCH1011 unmonitored by QDBRSPRE at statement
*N,

instruction X'104A'.


Cannot transfer to new owner or primary group.


Function check. MCH1011 unmonitored by QDBRSPRE at statement
*N,

instruction X'104A'.


FILE DFWOUT not restored to QTEMP.


FILE DFWDFD not restored to QTEMP.


1 security or data format changes occurred.


1 objects restored. 2 not restored to QTEMP.






F1 on Cannot transfer to new owner. (notice the "QSECOFR" I
was not signed on as QSECOFR when this error occurs



Message . . . . : Cannot transfer to new owner or primary
group.

Cause . . . . . : An attempt has been made to assign or
transfer the

ownership or primary group of an object. QSECOFR can not
be the new owner or

primary group because of reason code X'0003'. The reason
codes and and

their meanings are:


0000 - The profile cannot be the owner, it is already
the primary group.

0001 - The profile cannot be the primary group, it is
already the owner.

0002 - The profile specified to be the new owner does
not have a uid for

transfer ownership.


0003 - The profile for the new primary group does not
have a gid for

transfer group owner.




I have tried Allow object differences, still fails

I set the profile to Group Id = *GEN, still fails (although
we do not use Group Ids and I am not very familiar with it



Google did not turn up much



Any help would be greatly appreciated









------------------------------

Subject: Digest Footer

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) digest list
To post a message email: MIDRANGE-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://cp.mcafee.com/d/avndygwd6Qm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsrjhvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-sujKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jrb1JBYTvAn3hOYyyODtUTsS03fBitelAx7o4vVv1dnoovaAVgtHyIA8X0zVsYSH92eM8-nfbAaJMJZ00GRxcJMzGLQe9R842NZi10JOUalAx7o4vVsSCY--qejoS6xMb40o4xEK5jh07i8_io1Cy0cRfd42b81Cy0dFhLPh0yUyYrp76Sb6OXCoQ
or email: MIDRANGE-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://cp.mcafee.com/d/FZsSd3gQcCQm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsrjhvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-sujKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jrbVJBYTvAn3hOYyyODtUTsS03SdyszfYH92eM8_O-aOgzI2fBPPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsrNVB6.



------------------------------

End of MIDRANGE-L Digest, Vol 13, Issue 1618
********************************************

________________________________

This email message, including any attachment(s) is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is strictly prohibited. If you are not the intended recipient, please immediately contact the sender by email.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.
r***@public.gmane.org
2014-10-15 18:02:01 UTC
Permalink
Raw Message
I'll keep this in mind. But if this shred looks ok I think I'll settle
for that.

The only items on these disks is TSM (Tivoli Storage Manager) backups of
every client in our shop. Just stuff like whatever is on the CEO's PC and
whatnot. Nothing critical. :-)
And, actually, the data was supposed to be migrated off to our new Power 8
AIX based TSM server.


Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: "Monty G. James" <monty.james-K/***@public.gmane.org>
To: "midrange-l-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org" <midrange-l-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org>
Date: 10/15/2014 01:54 PM
Subject: Re: How to prepare disk on a Power 6 Suse Linux partition
for
Sent by: "MIDRANGE-L" <midrange-l-bounces-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org>



Use the AIX diagnostic cd available here:
https://www-304.ibm.com/webapp/set2/sas/f/diags/home.html, get
CDlatest.iso.


from: Kirk Goins <kirkgoins-***@public.gmane.org>
subject: Re: How to prepare disk on a Power 6 Suse Linux partition for
sale orlease return

OK That's a whole different issue...
No, they work fine for the Power 6. As long as they are used by Linux
or AIX and not IBM i.
I would rather avoid any low level formatting that might confuse the
bejeebers out of the leasing company.
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://cp.mcafee.com/d/5fHCMUqdEI8IICzBxYQsK6XCQQnT4nTTPqqbXybzMUSCy-U
y--Urjhd7aqbbbVJmI9BK4tl-wa9R842NZi10JOVIDkwgb7R842TbCStKgZBx_HYUYDt5D
HTbFIL8YyCesuvsVqWtAkRkrzKl3PWApmU6CQPrbVK_8K6zBV55BeXNKVI04xVkHnBPqIA
8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6y
Uld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsrGIbp
Date: 10/15/2014 01:16 PM
Subject: Re: How to prepare disk on a Power 6 Suse Linux partition
for sale or lease return
So the drives are non-supported for the Power6? Typically the only
difference is the sector/block size. I have formatted 300GB back to
283GB in the past and 146GB back to 139s or gone the other way.
Won't work.
But I have some in here that is labeled pSeries disk (down to the
labels on the drives themselves)
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://cp.mcafee.com/d/k-Kr3zqb2bb9EVovd7bxKVJd5ZN5ZZYSCy-UyUYedFELK
8LLK6QQjhOCyOO-rlH2prx7lvE2yti10IvkwgbsKr9R842NZi10JOVJDrAfpovW_ef9T
hpWZOWrbOf8FzD7DTemKDp5dl6UXBgY-F6lK1FJASO-rLObxEVuhhpjKYrKr018ulaRV
sSH92eM8-nfbAaJMJZ00GRxcJMzGLQe9R842NZi10JOUalAx7o4vVsSCY--qejoS6xMb
40o4xEK5jh07i8_io1Cy0cRfd42b81Cy0dFhLPh0yUyYrp76XFbrq0pnTxlv
To: Midrange Systems Technical Discussion
Date: 10/15/2014 01:05 PM
Subject: Re: How to prepare disk on a Power 6 Suse Linux
partition
for sale or lease return
Since I ma and i guy...
Heck I would create an LPAR ( or use one already cfg'd ) and point
those and only those disks to that LPAR, boot/install LIC which will
init the loadsource then use DST to init the others.
Again, I am not looking for a DOD rated wipe.
I am preparing my last Power 6 for lease return. I have all the
IBM i disk initialized. But I have some in here that is labeled
pSeries
disk
(down to the labels on the drives themselves). These were used by my
Suse
Linux lpar. SUSE Linux Enterprise Server 11 installation program
v3.3.91
(aka SLES 11).
I had a thread going at DeveloperWorks at
http://cp.mcafee.com/d/avndy0s738Qrhohppd7b3VEVsdTdFELK8LLLCQQnT4n7xNJ
d5ZN5ZZMSCyqekQmmnPqJojbs8WHZ0kjGg85zWA21rBPpeF0wmfGg85KndIXsxXb3_nVNV
eWbfnKnjpuhV5csUY-VORQX8FGET7sG7DR8OJMddI6SnPt-hsd7bOabatTztPpesRG9pxj
F45unN3PfDRm-9yIiJcnlrxapr7qNrlFweOtlFm9igeutsttt7c5Qi7K5S7D7iXSFEBTnd
8fE3zhPsxqNJmi4twhYKun8lrxrW01lH2prx7lvEsjGg85zWA21rBMkH92eM8_OVJdVZYQ
sCNId3wm80M93hsaCy0eAh-AM3d40pGuq84mg3d40rizvCy15N5USOedNi4n
but something went haywire there and my posts are marked as spam now.
I
suspect the words "for sale" in the subject line.
Used the HMC to set the partition profile settings to boot to SMS.
I also changed the partition properties boot keylock position to
Manual.
Then I said to activate the profile, using the advanced button to
ensure
that it was set to Manual and SMS. I also told it to open up a
terminal
window or console session.
Version EL350_149
SMS 1.7 (c) Copyright IBM Corp. 2000,2008 All rights reserved.
----------------------------------------------------------------------
---------
Main Menu
1. Select Language
2. Setup Remote IPL (Initial Program Load)
3. Change SCSI Settings
4. Select Console
5. Select Boot Options
I took
5. Select Boot Options
Multiboot
1. Select Install/Boot Device
2. Configure Boot Device Order
3. Multiboot Startup <OFF>
4. SAN Zoning Support
I took
1. Select Install/Boot Device
Select Device Type
1. Diskette
2. Tape
3. CD/DVD
4. IDE
5. Hard Drive
6. Network
7. List all Devices
I took
7. List all Devices
Select Device
Device Current Device
Number Position Name
1. 1 SCSI CD-ROM
( loc=U0588.001.012EF8C-CB1-C14-T1-L1-L0 )
2. 2 SCSI 1463 GB Harddisk
( loc=U0595.001.13230A8-CB1-C01-T5-L0-L0 ) I selected the
first, the SCSI CD-ROM.
Select Task
SCSI CD-ROM
( loc=U0588.001.012EF8C-CB1-C14-T1-L1-L0 )
1. Information
2. Normal Mode Boot
3. Service Mode Boot
3. Service Mode Boot
Are you sure you want to exit System Management Services?
1. Yes
2. No
I selected
1. Yes
Welcome to SuSE Linux Enterprise 11!
Type "install" to start the YaST installer on this CD/DVD
Type "slp" to start the YaST install via network
Type "rescue" to start the rescue system on this CD/DVD
Welcome to yaboot version r22.8-r1190.SuSE booted from
\ya
boot.ibm'
running with firmware 'IBM,EL350_149' on model 'IBM,8203-E4A',
serial 'IBM,0210813C5'
, partition 'deletemeLinux'
Enter "help" to get some basic usage information
In entered in rescue.
Main Menu
1) Start Installation
2) Settings
3) Expert
4) Exit or Reboot
Last time I tried 3) Expert. I could use ls to list files and
whatnot.
However I couldn't use fdisk as it kept telling me it wasn't found.
Tried
changing into various directories but I couldn't find it.
Any suggestions?
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept
1600 Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://cp.mcafee.com/d/1jWVIg6x8gdEI8IICzBxYQsK6XCQQnT4nTTPqqbXybz
MUSCy-Uy--Urjhd7aqbbbVJmI9BK4tl-wa9R842NZi10JOVIDkwgb7R842TbCStKgZ
Bx_HYUYDt5DHTbFIL8YyCesuvsVqWtAkRkrzKl3PWApmU6CTPrbVK_8K6zBV55BeXN
KVI04xVkHnBPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPq
rPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsrYQyiz
O0S
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
unsubscribe, or change list options,
http://cp.mcafee.com/d/2DRPowrhohppd7b3VEVsdTdFELK8LLLCQQnT4n7xNJd
5ZN5ZZMSCyqekQmmnPqJojbs8WHZ0kjGg85zWA21rBPpeF0wmfGg85KndIXsxXb3_n
VNVeWbfnKnjpuhV5csUY-VORQX8FGET7sG7DR8OJMddK6SnPt-hsd7bOabatTztPo0
c-l9QVmi4twh_BY4RtxxYGjB1SKaOgzI2fBPPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_g
UDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8I
moment to review the archives at
http://cp.mcafee.com/d/k-Kr3xAi6wUSyMyOOqem7PhOUrKrjhvshvvvdFELK8Kf3zqqbXybXXxJd4QsFEIILCRqMCmUhRnW0EDkwgb7R842TbCOti10IvkwgbsKrpSV3Sm7-LPzOtQmuLsKCOYzOaoVNVZPBHFShjlhKeVkffGhBrwqr76SnPt-hsd7bOabatTztPo0foS9Oc_OIA8X0z_bUH92eM8-nfdGOgzI2fBPOV2Hsbvg0aJojbs8WHZ3yti10IvkwgbsK2Bp8hS17-ndFLfLCzASdxEs2N0618qbxkQg1QyfQC0pEw3djPh0yO0pEw3qkrYQg8K8L6ShNIXeZbfCb
.
--
Kirk
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
subscribe, unsubscribe, or change list options,
http://cp.mcafee.com/d/avndygw96Qm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsrj
hvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-s
ujKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jrNJBYTvAn3hOYyyODtUTsS03fBi
telAx7o4vVv1dnoovaAVgtHyIA8X0zVsYSH92eM8-nfbAaJMJZ00GRxcJMzGLQe9R842
NZi10JOUalAx7o4vVsSCY--qejoS6xMb40o4xEK5jh07i8_io1Cy0cRfd42b81Cy0dFh
posting, please take a moment to review the archives at
http://cp.mcafee.com/d/5fHCMUpdEI8IICzBxYQsK6XCQQnT4nTTPqqbXybzMUSCy-Uy--Urjhd7aqbbbVJmI9BK4tl-wa9R842NZi10JOVIDkwgb7R842TbCStKgZBx_HYUYDt5DHTbFIL8YyCesuvsVqWtAkRkrzKl3PWApmU6CPhOrpvdTV5MQsL8EIFTudTdw0ZzoD8P_aOgzI2fYLyIA8X0zVsYSH92eM8-nfbAaJMJZ00GRxcJMzGLQe9R842NZi10JOUalAx7o4vVsSCY--qejoS6xMb40o4xEK5jh07i8_io1Cy0cRfd42b81Cy0dFhLPh0yUyYrp76V4Z9xERD990x
.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
unsubscribe, or change list options,
http://cp.mcafee.com/d/avndxMw91MOrhohppd7b3VEVsdTdFELK8LLLCQQnT4n7x
NJd5ZN5ZZMSCyqekQmmnPqJojbs8WHZ0kjGg85zWA21rBPpeF0wmfGg85KndIXsxXb3_
nVNVeWbfnKnjpuhV5csUY-VORQX8FGET7sG7DR8OJMddETdILCXYyUqenAkmkXL6XCM0
pYGjFOIA8X0z_bU9GX33VkDa3JslAx7o4vbDCRp8hS17OVVsxlK5LE05mI9BK4tl-xNe
F0wmfGg85Kn1iIA8X0z_bCQTDTPhOr6MQe1ow30Ad5MGq80Wh7Wj0cQg1CFVEwhp0cQg
Before posting, please take a moment to review the archives at
http://cp.mcafee.com/d/avndy0O86Qm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsrjhvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-sujKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jqa9JBYTvAn3hOYyyODtUTsS03SdyszfYH92eM8_O-aOgzI2fBPPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsrmMA1u6jkuKB
.
--
Kirk
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
unsubscribe, or change list options,
http://cp.mcafee.com/d/2DRPoOd2gw96Qm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsr
jhvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-su
jKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jqapJBYTvAn3hOYyyODtUTsS03fBite
lAx7o4vVv1dnoovaAVgtHyIA8X0zVsYSH92eM8-nfbAaJMJZ00GRxcJMzGLQe9R842NZi1
0JOUalAx7o4vVsSCY--qejoS6xMb40o4xEK5jh07i8_io1Cy0cRfd42b81Cy0dFhLPh0yU
please take a moment to review the archives at
http://cp.mcafee.com/d/5fHCMUe4zqb2bb9EVovd7bxKVJd5ZN5ZZYSCy-UyUYedFELK8LLK6QQjhOCyOO-rlH2prx7lvE2yti10IvkwgbsKr9R842NZi10JOVJDrAfpovW_ef9ThpWZOWrbOf8FzD7DTemKDp5dl6UXBgY-F6lK1FJ5ASO-rLObxEVuhhpjKYrKr01X6NehD-lAx7o4vVv5p8hS17OVVJmi4twhYKun8lrxrW01lH2prx7lvEsjGg85zWA21rBMkH92eM8_OVJdVZYQsCNId3wm80M93hsaCy0eAh-AM3d40pGuq84mg3d40rizvCy15N5USOedUyLBjfPO
.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
unsubscribe, or change list options,
http://cp.mcafee.com/d/2DRPoAd1MOrhohppd7b3VEVsdTdFELK8LLLCQQnT4n7xNJd
5ZN5ZZMSCyqekQmmnPqJojbs8WHZ0kjGg85zWA21rBPpeF0wmfGg85KndIXsxXb3_nVNVe
WbfnKnjpuhV5csUY-VORQX8FGET7sG7DR8OJMddEI6SnPt-hsd7bOabatTztPo0c-l9QVm
i4twh_BY4RtxxYGjB1SKaOgzI2fBPPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842
TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42byb
please take a moment to review the archives at
http://cp.mcafee.com/d/FZsS91MA76Qm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsrjhvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-sujKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jqbVJBYTvAn3hOYyyODtUTsS03SdyszfYH92eM8_O-aOgzI2fBPPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsrAtN6
.
--
Kirk


------------------------------

message: 2
date: Wed, 15 Oct 2014 12:33:08 -0500
from: Thomas Garvey <tgarvey-aP4BoU9uSdHQT0dZR+***@public.gmane.org>
subject: Re: What OS feature is OPNQRYF?

The OPNQRYF is just over a normal, non-temporary, database file. The
file does contain data extracted from journals however. But the OPNQRYF
couldn't know that or care.




Thomas Garvey
Since you mentioned journaling, what journaling is going on with the objects
involved in the opnqryf (the queried file(s), temp / new file, the library)
?
Jim
-----Original Message-----
Thomas Garvey
Sent: Wednesday, October 15, 2014 12:41 PM
To: Midrange Systems Technical Discussion
Subject: Re: What OS feature is OPNQRYF?
So far, the message is only occurring in this one job (with the OPNQRYF).
Thomas Garvey
I think that the SIGNOFF command has just as much likelihood of
generating that error as does the OPNQRYF command. Some license
messages are just repeated at periodic intervals until you either get
a license for it or remove it from the system.
BTW, if you are doing much journalling that option of the OS is so
very much worth it. Definitely. Without any doubt. I have time
trials...
Rob Berendt
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
unsubscribe,
or change list options,
http://cp.mcafee.com/d/avndygw720Qrhohppd7b3VEVsdTdFELK8LLLCQQnT4n7xNJd5ZN5ZZMSCyqekQmmnPqJojbs8WHZ0kjGg85zWA21rBPpeF0wmfGg85KndIXsxXb3_nVNVeWbfnKnjpuhV5csUY-VORQX8FGET7sG7DR8OJMddEK6SnPt-hsd7bOabatTztPo0c-l9QVmi4twh_BY4RtxxYGjB1SKaOgzI2fBPPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsrFJfH8fNY
moment to review the archives at
http://cp.mcafee.com/d/2DRPowd3gQ76Qm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsrjhvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-sujKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jq8USO-rLObxEVuhhpjKYrKr01X6NehD-lAx7o4vVv5p8hS17OVVJmi4twhYKun8lrxrW01lH2prx7lvEsjGg85zWA21rBMkH92eM8_OVJdVZYQsCNId3wm80M93hsaCy0eAh-AM3d40pGuq84mg3d40rizvCy15N5USOedLmYCaN_Z
.
------------------------------

message: 3
date: Wed, 15 Oct 2014 14:35:24 -0300
from: Roberto Jos? Etcheverry Romero <yggdrasil.raiker-***@public.gmane.org>
subject: Re: How to prepare disk on a Power 6 Suse Linux partition for
sale orlease return

Rob,

Those disks work either for Linux or AIX. i would pop an AIX diagnostic
disk and move all the disks from hdisk to pdisk to hdisk (array candidate
and back). That is if you have a raid controller. Otherwise i would muck
around the diag options, there's gotta be an "initialize" or "certify"
disk.
Worst case? plug them into a normal server and just erase them there. (any
xSeries or SystemX server with those bays can use those disks)

Best Regards,
OK That's a whole different issue...
No, they work fine for the Power 6. As long as they are used by Linux or
AIX and not IBM i.
I would rather avoid any low level formatting that might confuse the
bejeebers out of the leasing company.
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://cp.mcafee.com/d/1jWVIi41Eq6zqb2bb9EVovd7bxKVJd5ZN5ZZYSCy-UyUYedFELK8LLK6QQjhOCyOO-rlH2prx7lvE2yti10IvkwgbsKr9R842NZi10JOVJDrAfpovW_ef9ThpWZOWrbOf8FzD7DTemKDp5dl6UXBgY-F6lK1FJ5USO-rLObxEVuhhpjKYrKr018ulaRVsSH92eM8-nfbAaJMJZ00GRxcJMzGLQe9R842NZi10JOUalAx7o4vVsSCY--qejoS6xMb40o4xEK5jh07i8_io1Cy0cRfd42b81Cy0dFhLPh0yUyYrp76W95NBwpyuO8f
To: Midrange Systems Technical Discussion
Date: 10/15/2014 01:16 PM
Subject: Re: How to prepare disk on a Power 6 Suse Linux partition
for sale or lease return
So the drives are non-supported for the Power6? Typically the only
difference is the sector/block size. I have formatted 300GB back to 283GB
in the past and 146GB back to 139s or gone the other way.
Won't work.
But I have some in here that is labeled pSeries disk (down to the
labels
on the drives themselves)
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://cp.mcafee.com/d/2DRPoA96Qm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsrjhvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-sujKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jq9EVdILCXYyUqenAkmkXL6XCM0i7BiJundGOgzI2fBPOV2Hsbvg0aJojbs8WHZ3yti10IvkwgbsK2Bp8hS17-ndFLfLCzASdxEs2N0618qbxkQg1QyfQC0pEw3djPh0yO0pEw3qkrYQg8K8L6ShNKkqt
To: Midrange Systems Technical Discussion
Date: 10/15/2014 01:05 PM
Subject: Re: How to prepare disk on a Power 6 Suse Linux
partition
for sale or lease return
Since I ma and i guy...
Heck I would create an LPAR ( or use one already cfg'd ) and point
those
and only those disks to that LPAR, boot/install LIC which will init the
loadsource then use DST to init the others.
Again, I am not looking for a DOD rated wipe.
I am preparing my last Power 6 for lease return. I have all the IBM
i
disk initialized. But I have some in here that is labeled pSeries
disk
(down to the labels on the drives themselves). These were used by my
Suse
Linux lpar. SUSE Linux Enterprise Server 11 installation program
v3.3.91
(aka SLES 11).
I had a thread going at DeveloperWorks at
http://cp.mcafee.com/d/avndxMs96Qm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsrjhvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-sujKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jqtPrbVK_8K6zBV55BeXNKVIDeqR4IMFQy2LbUxVDPWHv4Nm9mCbGJMBcJzJoJGQM7peGQH4F87feKeKKzC2W93T2X3PzFtXkQiXHCA7Q1NEVKgJoSH92eM8-nfbAaJMJZ00GRxcJMzGLQe9R842NZi10JOUalAx7o4vVsSCY--qejoS6xMb40o4xEK5jh07i8_io1Cy0cRfd42b81Cy0dFhLPh0yUyYrp76O0_Rvtq-
but something went haywire there and my posts are marked as spam now.
I
suspect the words "for sale" in the subject line.
Used the HMC to set the partition profile settings to boot to SMS.
I also changed the partition properties boot keylock position to
Manual.
Then I said to activate the profile, using the advanced button to
ensure
that it was set to Manual and SMS. I also told it to open up a
terminal
window or console session.
Version EL350_149
SMS 1.7 (c) Copyright IBM Corp. 2000,2008 All rights reserved.
-------------------------------------------------------------------------------
Main Menu
1. Select Language
2. Setup Remote IPL (Initial Program Load)
3. Change SCSI Settings
4. Select Console
5. Select Boot Options
I took
5. Select Boot Options
Multiboot
1. Select Install/Boot Device
2. Configure Boot Device Order
3. Multiboot Startup <OFF>
4. SAN Zoning Support
I took
1. Select Install/Boot Device
Select Device Type
1. Diskette
2. Tape
3. CD/DVD
4. IDE
5. Hard Drive
6. Network
7. List all Devices
I took
7. List all Devices
Select Device
Device Current Device
Number Position Name
1. 1 SCSI CD-ROM
( loc=U0588.001.012EF8C-CB1-C14-T1-L1-L0 )
2. 2 SCSI 1463 GB Harddisk
( loc=U0595.001.13230A8-CB1-C01-T5-L0-L0 )
I selected the first, the SCSI CD-ROM.
Select Task
SCSI CD-ROM
( loc=U0588.001.012EF8C-CB1-C14-T1-L1-L0 )
1. Information
2. Normal Mode Boot
3. Service Mode Boot
3. Service Mode Boot
Are you sure you want to exit System Management Services?
1. Yes
2. No
I selected
1. Yes
Welcome to SuSE Linux Enterprise 11!
Type "install" to start the YaST installer on this CD/DVD
Type "slp" to start the YaST install via network
Type "rescue" to start the rescue system on this CD/DVD
Welcome to yaboot version r22.8-r1190.SuSE
booted from
,0:1,\suseboot\ya
boot.ibm'
running with firmware 'IBM,EL350_149' on model 'IBM,8203-E4A', serial
'IBM,0210813C5'
, partition 'deletemeLinux'
Enter "help" to get some basic usage information
In entered in rescue.
Main Menu
1) Start Installation
2) Settings
3) Expert
4) Exit or Reboot
Last time I tried 3) Expert. I could use ls to list files and
whatnot.
However I couldn't use fdisk as it kept telling me it wasn't found.
Tried
changing into various directories but I couldn't find it.
Any suggestions?
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://cp.mcafee.com/d/1jWVIq410qdEI8IICzBxYQsK6XCQQnT4nTTPqqbXybzMUSCy-Uy--Urjhd7aqbbbVJmI9BK4tl-wa9R842NZi10JOVIDkwgb7R842TbCStKgZBx_HYUYDt5DHTbFIL8YyCesuvsVqWtAkRkrzKl3PWApmU6CQQjrbVK_8K6zBV55BeXNKVI04xVkHnBPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsrhFK8
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing
list
To subscribe, unsubscribe, or change list options,
http://cp.mcafee.com/d/FZsS81MOrhohppd7b3VEVsdTdFELK8LLLCQQnT4n7xNJd5ZN5ZZMSCyqekQmmnPqJojbs8WHZ0kjGg85zWA21rBPpeF0wmfGg85KndIXsxXb3_nVNVeWbfnKnjpuhV5csUY-VORQX8FGET7sG7DR8OJMddFFCSnPt-hsd7bOabatTztPo0c-l9QVmi4twh_BY4RtxxYGjB1SKaOgzI2fBPPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsr2qMG
Before posting, please take a moment to review the archives at
http://cp.mcafee.com/d/5fHCN0i4zqb2bb9EVovd7bxKVJd5ZN5ZZYSCy-UyUYedFELK8LLK6QQjhOCyOO-rlH2prx7lvE2yti10IvkwgbsKr9R842NZi10JOVJDrAfpovW_ef9ThpWZOWrbOf8FzD7DTemKDp5dl6UXBgY-F6lK1FJdASO-rLObxEVuhhpjKYrKr01X6NehD-lAx7o4vVv5p8hS17OVVJmi4twhYKun8lrxrW01lH2prx7lvEsjGg85zWA21rBMkH92eM8_OVJdVZYQsCNId3wm80M93hsaCy0eAh-AM3d40pGuq84mg3d40rizvCy15N5USOedZ7bP
.
--
Kirk
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To subscribe, unsubscribe, or change list options,
http://cp.mcafee.com/d/2DRPoQ93gArhohppd7b3VEVsdTdFELK8LLLCQQnT4n7xNJd5ZN5ZZMSCyqekQmmnPqJojbs8WHZ0kjGg85zWA21rBPpeF0wmfGg85KndIXsxXb3_nVNVeWbfnKnjpuhV5csUY-VORQX8FGET7sG7DR8OJMddFI6SnPt-hsd7bOabatTztPo0c-l9QVmi4twh_BY4RtxxYGjB1SKaOgzI2fBPPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsrkPeb
Before posting, please take a moment to review the archives at
http://cp.mcafee.com/d/avndzgArhohppd7b3VEVsdTdFELK8LLLCQQnT4n7xNJd5ZN5ZZMSCyqekQmmnPqJojbs8WHZ0kjGg85zWA21rBPpeF0wmfGg85KndIXsxXb3_nVNVeWbfnKnjpuhV5csUY-VORQX8FGET7sG7DR8OJMddFLCSnPt-hsd7bOabatTztPo0foS9Oc_OIA8X0z_bUH92eM8-nfdGOgzI2fBPOV2Hsbvg0aJojbs8WHZ3yti10IvkwgbsK2Bp8hS17-ndFLfLCzASdxEs2N0618qbxkQg1QyfQC0pEw3djPh0yO0pEw3qkrYQg8K8L6ShNJohA-G-UIksy
.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To subscribe, unsubscribe, or change list options,
http://cp.mcafee.com/d/2DRPowcxMwd6Qm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsrjhvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-sujKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jqrxJBYTvAn3hOYyyODtUTsS03fBitelAx7o4vVv1dnoovaAVgtHyIA8X0zVsYSH92eM8-nfbAaJMJZ00GRxcJMzGLQe9R842NZi10JOUalAx7o4vVsSCY--qejoS6xMb40o4xEK5jh07i8_io1Cy0cRfd42b81Cy0dFhLPh0yUyYrp76_mwJpd9XJJT4
Before posting, please take a moment to review the archives at
http://cp.mcafee.com/d/avndzgQcygArhohppd7b3VEVsdTdFELK8LLLCQQnT4n7xNJd5ZN5ZZMSCyqekQmmnPqJojbs8WHZ0kjGg85zWA21rBPpeF0wmfGg85KndIXsxXb3_nVNVeWbfnKnjpuhV5csUY-VORQX8FGET7sG7DR8OJMddFzzrbVK_8K6zBV55BeXNKVI07Ir4V6vVmi4twh_BYlAx7o4vbDCRp8hS17OVVsxlK5LE05mI9BK4tl-xNeF0wmfGg85Kn1iIA8X0z_bCQTDTPhOr6MQe1ow30Ad5MGq80Wh7Wj0cQg1CFVEwhp0cQg1Jad-q84n4nzr8USWpC
.
--
Kirk
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To subscribe, unsubscribe, or change list options,
http://cp.mcafee.com/d/5fHCMUSyMyOOqem7PhOUrKrjhvshvvvdFELK8Kf3zqqbXybXXxJd4QsFEIILCRqMCmUhRnW0EDkwgb7R842TbCOti10IvkwgbsKrpSV3Sm7-LPzOtQmuLsKCOYzOaoVNVZPBHFShjlhKeVkffGhBrwqrjudILCXYyUqenAkmkXL6XCM0pYGjFOIA8X0z_bU9GX33VkDa3JslAx7o4vbDCRp8hS17OVVsxlK5LE05mI9BK4tl-xNeF0wmfGg85Kn1iIA8X0z_bCQTDTPhOr6MQe1ow30Ad5MGq80Wh7Wj0cQg1CFVEwhp0cQg1Jad-q84n4nzr8UTRtB
Before posting, please take a moment to review the archives
at
http://cp.mcafee.com/d/k-Kr3xESyMyOOqem7PhOUrKrjhvshvvvdFELK8Kf3zqqbXybXXxJd4QsFEIILCRqMCmUhRnW0EDkwgb7R842TbCOti10IvkwgbsKrpSV3Sm7-LPzOtQmuLsKCOYzOaoVNVZPBHFShjlhKeVkffGhBrwqrjd79JBYTvAn3hOYyyODtUTsS03SdyszfYH92eM8_O-aOgzI2fBPPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsrwLE_UtEEacFV
.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To subscribe, unsubscribe, or change list options,
http://cp.mcafee.com/d/FZsS92gOd1NJ5x5BAQsIfCzBMTsSCy-Uy---rjhvshsu76QQnT4nTT3qq9EVjhppvdGRxcJMzGLQ1heF0wmfGg85KndAWA21o-F0wmVsSPJO7IIfZvD7AXEIZuVtdBV7AkNPzPXDbnjIyCGzstOEuvkzaT0QSPsSO-rLObxEVuhhpjKYrKr01DOFeDaOgzI2fYLwCHIcfBisEeRNmi4twhYKurlAx7o4vbDBO5mUm-w0lqMCmUhRnW74WA21o-F0wmVs5aOgzI2fYKrjuvvd79Ir3gU5y0c2gQn2FEw3F4vFc0Ph06qDCy15A0Ph06QETVEwhshudIzzrDUrBSFpt5FC
Before posting, please take a moment to review the archives
at
http://cp.mcafee.com/d/2DRPos81NJ5x5BAQsIfCzBMTsSCy-Uy---rjhvshsu76QQnT4nTT3qq9EVjhppvdGRxcJMzGLQ1heF0wmfGg85KndAWA21o-F0wmVsSPJO7IIfZvD7AXEIZuVtdBV7AkNPzPXDbnjIyCGzstOEuvkzaT0QSOyrpvdTV5MQsL8EIFTudTdw0ZzoD8P_aOgzI2fYLyIA8X0zVsYSH92eM8-nfbAaJMJZ00GRxcJMzGLQe9R842NZi10JOUalAx7o4vVsSCY--qejoS6xMb40o4xEK5jh07i8_io1Cy0cRfd42b81Cy0dFhLPh0yUyYrp76PNi8sz4ByZFG
.
--
Kirk
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To subscribe, unsubscribe, or change list options,
http://cp.mcafee.com/d/k-Kr6zqb2bb9EVovd7bxKVJd5ZN5ZZYSCy-UyUYedFELK8LLK6QQjhOCyOO-rlH2prx7lvE2yti10IvkwgbsKr9R842NZi10JOVJDrAfpovW_ef9ThpWZOWrbOf8FzD7DTemKDp5dl6UXBgY-F6lK1FJBcSO-rLObxEVuhhpjKYrKr01DOFeDaOgzI2fYLwCHIcfBisEeRNmi4twhYKurlAx7o4vbDBO5mUm-w0lqMCmUhRnW74WA21o-F0wmVs5aOgzI2fYKrjuvvd79Ir3gU5y0c2gQn2FEw3F4vFc0Ph06qDCy15A0Ph06QETVEwhshudIzzr652Boqlyt0p
Before posting, please take a moment to review the archives
at
http://cp.mcafee.com/d/k-Kr4x0SyMyOOqem7PhOUrKrjhvshvvvdFELK8Kf3zqqbXybXXxJd4QsFEIILCRqMCmUhRnW0EDkwgb7R842TbCOti10IvkwgbsKrpSV3Sm7-LPzOtQmuLsKCOYzOaoVNVZPBHFShjlhKeVkffGhBrwqrppdILCXYyUqenAkmkXL6XCM0uNIjAp_Bp8hS17-nNmi4twhYKurlAx7o4vbDBO5mUm-w0lqMCmUhRnW74WA21o-F0wmVs5aOgzI2fYKrjuvvd79Ir3gU5y0c2gQn2FEw3F4vFc0Ph06qDCy15A0Ph06QETVEwhshudIzzv4uprE7iIn-E
.
------------------------------

message: 4
date: Wed, 15 Oct 2014 13:35:57 -0400
from: "John Allen" <jallen-***@public.gmane.org>
subject: RSTOBJ = MCH1011 Can not transfer to new owner ot primary
group

I am trying to restore a couple of files from a save file.
The files were saved another system (not ours)

We are running 6.1

I can do a DSPSAVF file and see the contents of the save
file

I have tried doing the retore with QSECOFR

Then I created a user profile the same as the owner of the
files (display on DSPSAVF screen)

We do not use



The error is:



RSTOBJ OBJ(*ALL) SAVLIB(QTEMP) DEV(*SAVF) SAVF(TGLIB/TGSAVF)


DTAARA DFWSAVDBX in library QTEMP restored with primary
group *NONE.

Cannot transfer to new owner or primary group.


Function check. MCH1011 unmonitored by QDBRSPRE at statement
*N,

instruction X'104A'.


Cannot transfer to new owner or primary group.


Function check. MCH1011 unmonitored by QDBRSPRE at statement
*N,

instruction X'104A'.


FILE DFWOUT not restored to QTEMP.


FILE DFWDFD not restored to QTEMP.


1 security or data format changes occurred.


1 objects restored. 2 not restored to QTEMP.






F1 on Cannot transfer to new owner. (notice the "QSECOFR" I
was not signed on as QSECOFR when this error occurs



Message . . . . : Cannot transfer to new owner or primary
group.

Cause . . . . . : An attempt has been made to assign or
transfer the

ownership or primary group of an object. QSECOFR can not
be the new owner or

primary group because of reason code X'0003'. The reason
codes and and

their meanings are:


0000 - The profile cannot be the owner, it is already
the primary group.

0001 - The profile cannot be the primary group, it is
already the owner.

0002 - The profile specified to be the new owner does
not have a uid for

transfer ownership.


0003 - The profile for the new primary group does not
have a gid for

transfer group owner.




I have tried Allow object differences, still fails

I set the profile to Group Id = *GEN, still fails (although
we do not use Group Ids and I am not very familiar with it



Google did not turn up much



Any help would be greatly appreciated









------------------------------

Subject: Digest Footer

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) digest list
To post a message email: MIDRANGE-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit:
http://cp.mcafee.com/d/avndygwd6Qm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsrjhvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-sujKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jrb1JBYTvAn3hOYyyODtUTsS03fBitelAx7o4vVv1dnoovaAVgtHyIA8X0zVsYSH92eM8-nfbAaJMJZ00GRxcJMzGLQe9R842NZi10JOUalAx7o4vVsSCY--qejoS6xMb40o4xEK5jh07i8_io1Cy0cRfd42b81Cy0dFhLPh0yUyYrp76Sb6OXCoQ

or email: MIDRANGE-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at
http://cp.mcafee.com/d/FZsSd3gQcCQm4mmjhOM-qen3tPqqbXybXXVJd5ZN5NUsrjhvshvvsdFECzBd5BBYSHm4OT2eG_g54WA21o-F0wmVsSjGg85zWA21rBPreT8uOM_R-sujKyPRXBQSnAuhj7effKsJteOaqGdNTaxVZicHs3jrbVJBYTvAn3hOYyyODtUTsS03SdyszfYH92eM8_O-aOgzI2fBPPqIA8X0zVsYKgGT2TQ02Hm4OT2eG_gUDkwgb7R842TbwFmi4twh_BPqrPXVEVdzoq70Ig1wi6yUld40t8zZ9w6q80PkYQg8Iw6q80SB6_d42bybNJAsrNVB6
.



------------------------------

End of MIDRANGE-L Digest, Vol 13, Issue 1618
********************************************

________________________________

This email message, including any attachment(s) is for the sole use of the
intended recipient(s) and may contain confidential information. Any
unauthorized review, use, disclosure or distribution is strictly
prohibited. If you are not the intended recipient, please immediately
contact the sender by email.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request-Zwy7GipZuJhWk0Htik3J/***@public.gmane.org
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.
Loading...